Set 40mm-300mm
Item No.: PK-K-300SET
Size:40mm-300mm
Measure:1025px×1025px×337.5px
Weight: 3.75kg/unit
Q'ty per Carton: 4 PCS
GW/NW: 20/18KG
Carton Size: 1400px×1050px×1100px
20”: 1100sets ;
Pls check the following using steps for reference
|
1, Adjust the distance between the 2 blades to the hole size which you would like to cut |
2, unlock and remove the spring and nut from the hole cutter |
|
3, put the cutter through the transparent cover |
4,replace and tighten the spring and nut |
|
5,cut hole by attaching a power drill to the top of cutter |
6, the hole after cutting |
Detailed information:
|
1、Body |
Material: #45 High Carbon Steel Hardness: No heat-treated Finish: Nickel plated or Black Oxid or Pearl Nickel Plated Size: 40-300mm |
|
|
2、Drills |
T.C.T Drill Diameter: 8mm Material: C50 Body and YG8 Tip Hardness: YG8: HRC 85-90 C50: HRC 35-45 Finish: Black electrophoresis or Nickel plated |
HSS Drill Diameter: 8mm Material: HSS(4241) Hardness: C50: HRC61-65 Finish: Black electrophoresis or Nickel plated |
|
3、Cutter Blades |
T.C.T Cutter Blade Material: YG8 cutter edge and C50 Body Hardness: YG8 Tip HRC 85-90 C50 Body HRC 35-45 Finish: Nickel Plated |
H.S.S Cutter Blade Material: HSS(4241) Hardness: Heat-treated HRC61-65 Finish: Black electrophoresis |
|
4、Allen-Key |
Material: C50 Carbon Steel HRC : Heat-treated HRC 40-45 Finish : Nickel Plated |
|
|
5、5pcs Wooden Drill |
Size:4mm,5mm,6mm,8mm,10mm Material: #45 Carbon Steel Hardness: Heat-treated HRC 38-43 Finish: Black Oxid and polished |
|
|
6、5pcs Concrete Drill |
Size:4mm,5mm,6mm,8mm,10mm Material: T.C.T Tip and C45 Body Hardness: T.C.T Tip Heat-treated HRC85-90 C45 Body Heat-treated HRC38-43 Finish: Nickel Plated |
|
|
7、Dust Cover |
PC material |
|
|
8、1pc Pencil and 1pc 3mm Ruler |
||
